Space Research Laboratory

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== TledAmpParams_a =====


<code>
 Definition of amplification parameter record for LED, sub-type 'a'

 Version 1.0

 Level(s): 3

 Format(s): f10,f30,f40,f50

 This is structure recording the calibration values used
 by the on-ground analysis.


 TledAmpParams_a::
    chLim     : LONG[2,8]    Pulse height limits [lim,det]
    off       : LONG[3,8]    Offset [gain,det]
    ch2keV    : DOUBLE[3,8]  Conversion factors ('amplifications') [gain,det]
    nl_off    : LONG[8]      Non-linearity correction offsets [det]
    nl_ch2keV : DOUBLE[8]    Non-linearity correction conversion factors [det]


 lim:   0 = low-limit (inclusive)
        1 = high-limit (inclusive)

 gain:  0 = high
        1 = medium
        2 = low

 det :  0 = D11
        1 = D12
        2 = D13
        3 = D14
        4 = D15
        5 = D16
        6 = D17
        7 = D2


 VERSION HISTORY:

 1.0 - 2006-11-30

       First version for automated (on-need) structure definition (ER)

</code>