User Tools

Site Tools


tscheader_a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tscheader_a [2023/10/11 20:23] – created admintscheader_a [2023/10/12 16:16] (current) admin
Line 1: Line 1:
 +===== TscHeader_a =====
  
 +<code>
 + Definition of the Science Header, sub-type 'a'
  
-=====  =====+ Version 1.1
  
-<code>+ Level(s): 2,3 
 + 
 + Format(s): f10, f30, f40, f50 
 + 
 + 
 + DESCRIPTION 
 + Science data structures for all data levels and all data formats use this same header type. 
 + 
 + 
 + NOTE 1: The bit numbering used here is reversed as compared to the one in the Onboard Science 
 +         Software documentation. The numbering here is the standard one for Intel- and Alpha- 
 +         technologies, while the OSS documentation follows the numbering of the MIL-STD-1750A, 
 +         used in ERNE onboard processor. 
 + 
 + NOTE 2: Not all of the fields have been managed by all of the previous on-board versions by 
 +         themselves, but are set by the on-ground processing (from level-1 to level-2), when 
 +         appropriate. 
 + 
 + 
 + TscHeader_a - science header is a common structure for all data types. It has the following fields 
 +    lobt           : DOUBLE      Local onboard time; start time of this measurement period 
 +                                 The value is seconds (and fractions) since 1958.01.01 00:00:00.0 
 +    leap           : BYTE        Leap seconds up to this lobt (for converting between lobt and UT) 
 +    tmFormat       : BYTE        Hexadecimal telemetry packet format indicator (e.g. 0x50) 
 +    ossVer         : INT         Hexadecimal Onboard Science Software version (e.g. 0x2500) 
 +    minCtr         : UINT        Cyclic onboard minute counter (actually integration period counter) 
 +    statFlags      : INT         16-bit status flag word of the instrument: 
 +                                    b15    = HED OFF        (most significant bit) 
 +                                    b14    = LED OFF 
 +                                    b8-b13 = RESERVED 
 +                                    b7     = HED S1H2XHIT Disconnected 
 +                                    b6     = HED AC1 Disconnected 
 +                                    b5     = HED AC2 Disconnected 
 +                                    b4     = HED EL BIT OFF 
 +                                    b3     = HED 3x HIT LEVEL 
 +                                    b2     = LED 3x HIT LEVEL 
 +                                    b1     = HED OVERLOAD 
 +                                    b0     = LED OVERLOAD   (least significant bit) 
 +    qFlagsA        : LONG        Quality flags 32-bit, (TBD) 
 +    qFlagsB        : LONG        Quality flags 32-bit, (TBD) 
 + 
 + 
 + VERSION HISTORY: 
 + 
 + 1.1 - 2007-01-17 
 + 
 +       Corrected type of the minCntr from integer to unsigned integer (ER) 
 + 
 + 
 + 
 + 1.0 - 2006-10-25 
 + 
 +       First version for automated (on-need) structure definition (ER)
  
 </code> </code>
  
tscheader_a.1697045021.txt.gz · Last modified: 2023/10/11 20:23 by admin